Swing Gates are manufactured
from mild steel hollow section and are based upon a triangular form, complete with strengthening
struts. The gate swings on adjustable hinges for ease of
installation.
Swing Gates are available to a maximum width of 6
metres as standard, above this, the use of two gates, locked centrally
is normally required. Gates to greater widths are
available by special request.
Specification:
Swing gates are available to the following specifications:
|
Up to 4 metres |
4 metres to 6 metres |
| Bearing Post: |
120mm x 120mm x 1700mm |
150mm x 150mm x 2000mm |
| Latch Post: |
80mm x 80mm x 1700mm |
80mm x 80mm x 1700mm |
| Gate Section: |
80mm x 80mm, 50mm infill |
80mm x 80mm, 50mm infill |
Recommended height of top beam above ground is
1000mm. Gates are supplied complete with one latch
post. Additional latch posts, both fixed and removable
versions, for locking in the open
position are available as optional extras.
|
Gates are manufactured to be locked with a
padlock as standard. Centrally locking gates have double
padlock option.
Gates are galvanised to BS EN
ISO 1461: 1999 as standard with optional extra to powder coat
to standard BS/RAL colours. |
 |
|
